85% market share in Asia low-end fleet management market, most cost-efficient and popular multi-function China GPS tracker GT06N
Size : 105.8×54.5×16.4mm
Accessories : Power cable/Relay/Microphone/SOS alarm Button
Installing the SIM card Important:
1 A SIM card is required in order to use cellular services whenconnecting to GSM networks.
2 Keep the SIM card GPRS availability
3 Note down the SIM card phone numbers which is device contacting numbers. Open the side plug, install the SIM card in the right direction, turn on the device.
Setting up and activating the deviceTo set up and activating the device, you should send SMS to device numbers by mobile phone, Setting server SMS: SERVER,1,gps.itrack.top,8841,0#
Installing the device:
1. Connect according wires to your car by referring to Wiring Diagram.
2.Install the device in following three suggested place:Important:
A. Make it covert for security factors.
B.Keep away from high power electrical devices, such as reversing radar,anti-theft device or other vehicle communication equipment which may affect the device signal.
C .Keep the device front face up & No metallic cases above the devicewhich may affect signal as well. Such as the windshield which is pasted with metalthermal-protective coating or heating coating.
Via SMS & Via tracking platform : www.itrack.top (U:demo P:123456)
You can contact our sales(Skype ID:siwode2013)to get one user account for free to try.
You could download itrack app by searching gpsitrack (For both IOS AND Android)Basic Information
3 colors LED meanings
1.Red LED -Power status
Normal working (backup battery)
Normal working (external power supplying)
2.Green LED -GSM status
Normal working with GSM network
No GSM signal
3.Blue LED -GPS status
Searching GPS signal
Normal working with GPS fixed
No GPS fixed
When any kinds of alarms happened, device will send alarm SMS&CALL SOS numbers.
1. Vibration Alarm When ACC is off and some vibration happened, device will alarm.
2. Cut-off alarm When external power is cut, device will alarm.
3. Geo-fence alarm After setting geo-fence range, if the device comes in & out the range, it will alarm.
4. Low-power alarm When external power is cut, device will keep working with its backup battery andwhen its battery is too low, device will alarm.
5. Movement alarm When ACC is off, if the vehicle is moved, device will alarm.
Note: For other alarm setting and parameter setting, please check the commandlist provided by the supplier.
1.When device in the background display not on-line or off-line, First observe the device 3 indicator is normal, according to the device lights status to judge device work condition, if the red light flashes, the green light is not bright, please check that the SIM card is installed correctly, if the installation is no problem, please replace the SIM card test again. Under no condition to observe the situation, use mobile phone dial SIM card device number, if not connect successful, indicating that the device Area is no GSM signal or signal is weak, please try it again in a good signal place; if the device is insufficient balance or out of service, Please try again after recharge; if connect successful, please consult the appropriate operator if SIM card is open GPRS function; if not connected, prompt power off ,please check that the device is installed properly.
2 When the GPS signal reception abnormal, please take it into the broad placepositioning, general first positioning need 1-2 minutes. If a long time does notpositioning, please check the device installation location if meets the requirements,the normal installation without metal shielding.
3.When the GSM signal reception abnormal, please check the device SIM cardis installed correctly; or the location may not cover GSM signal (such as abasement), please use in the place where signal coverage.
4.When power-up ,the red power light is off, please check the wiring is correct,and after exclude the internal device problem then can power-up again.
1. Why the GPS tracker device can off-line?
Maybe there are 3 reasons i.e. device poweroff or outage, weak or none signal, SIM card debts or GPRS service overdue.
2. How can you handle with Question 1?
Firstly use your phone call the number of SIM card, then check the voltage and current data whether beyond the specified range or switch off the circuit; Take off the environment of closed or the mental objects; Call the operator of SIM card to assure the card is debts or GPRS overdue and pay the fee or update GPRS.
3. Why you can not monitor?
Because you didn't set up the specific number and open the caller display of you SIM card. The latter will affect the former and lead to monitor failure.